This test report details the compliance testing of a Projector manufactured by Shenzhen Neutop Optoelectronics Co., Ltd. The tests were conducted by Bay Area Compliance Laboratories Corp. (Shenzhen) to ensure adherence to FCC Part 15, Subpart C, specifically section 15.203, 15.207, 15.205, 15.209, and 15.247 rules. The tested model is D005, with multiple models D003 and D004 also covered under this report.
The report includes a comprehensive assessment of various parameters, including AC Line Conducted Emissions, Radiated Emissions, 20 dB Emission Bandwidth, Channel Separation, Number of Hopping Frequency, Time of Occupancy, Peak Output Power Measurement, and Band Edges. The testing methodology followed ANSI C63.10-2013 standards. The EUT was configured to transmit in an engineering mode, and the results indicate that the device complies with the specified FCC standards.
The report also includes details on the test setup, equipment used, and environmental conditions during testing. The antenna requirement is also addressed, confirming that the EUT utilizes an internal antenna arrangement with a gain of 2.5dBi, fulfilling the necessary requirements. The report concludes that the EUT passed all tests and is compliant with the FCC regulations.