This document presents the test setup photos for the CNC Cutter And Engraver, model TTC-H40, manufactured by Shenzhen HTT Technology Co., Ltd. The report number associated with these tests is HTT202504205. The photos illustrate the configurations used for both Radiated Emission and Conducted Emission testing.
The Radiated Emission test setup showcases the device under test (DUT) positioned within an anechoic chamber, designed to minimize reflections and external interference. The Conducted Emission test setup displays the DUT connected to testing equipment, likely a spectrum analyzer or similar device, to measure emissions conducted through power and signal cables.
These test setups are crucial for ensuring the CNC Cutter And Engraver meets regulatory compliance standards for electromagnetic compatibility (EMC). The tests are conducted to verify that the device does not emit excessive electromagnetic radiation or conduct unwanted signals that could interfere with other electronic equipment.
Array
(
[0] => Array
(
[url_sha] => 10242c9c956d00779748b727d60e55e026cfc2a22437fed0921f700a4d40a84f
[source] => fccid
[url] => https://apps.fcc.gov/eas/GetApplicationAttachment.html?id=8263086
[href_text] => appendix I EUT Test Setup photo
[href_description] => Shenzhen TwoTrees Technology Co., Ltd. TTC-H40 CNC Cutter And Engraver 2A7F8-TTC-H40 2A7F8TTCH40 ttc h40
[http_status] => 200
[http_lastmod] => 0000-00-00 00:00:00
[http_contenttype] =>
[http_filename] => GetApplicationAttachment.html?id=8263086
[http_size] => 215752
[file_sha256] => fdf6112caa6716b180d8b4ac1e643de7a45c01a3027775ffb3e1b47f18eed0a2
[domain] => document.fccid
)
)
Array
(
[file_sha256] => fdf6112caa6716b180d8b4ac1e643de7a45c01a3027775ffb3e1b47f18eed0a2
[cleanFccId] => 2A7F8TTCH40
[title] => Shenzhen HTT Technology: CNC Cutter & Engraver Test
[description] => Test setup photos for the CNC Cutter And Engraver (Model TTC-H40) by Shenzhen HTT Technology. Radiated and Conducted Emission tests are shown.
[brand_name] => Shenzhen HTT Technology
[keywords] => ["CNC Cutter", "Engraver", "TTC-H40", "HTT202504205"]
[intro] =>
This document presents the test setup photos for the CNC Cutter And Engraver, model TTC-H40, manufactured by Shenzhen HTT Technology Co., Ltd. The report number associated with these tests is HTT202504205. The photos illustrate the configurations used for both Radiated Emission and Conducted Emission testing.
The Radiated Emission test setup showcases the device under test (DUT) positioned within an anechoic chamber, designed to minimize reflections and external interference. The Conducted Emission test setup displays the DUT connected to testing equipment, likely a spectrum analyzer or similar device, to measure emissions conducted through power and signal cables.
These test setups are crucial for ensuring the CNC Cutter And Engraver meets regulatory compliance standards for electromagnetic compatibility (EMC). The tests are conducted to verify that the device does not emit excessive electromagnetic radiation or conduct unwanted signals that could interfere with other electronic equipment.
)
Array
(
[0] => Array
(
[id] => 8263086
[file_sha256] =>
[applicationId] => 2JlgH/Lg+Ohs19LD5Wctrw==
[description] => appendix I EUT Test Setup photo
[shortTermConfidential] => No
[permanentConfidential] => No
[supercede] => No
[exhibitType] => Test Setup Photos
[fileType] => Adobe Acrobat PDF
[displayType] => pdf
[fileSize] => 215752
[submissionDate] => 2025-05-06 00:00:00
[dateAvailable] => 2025-05-06 00:00:00
[creationDate] =>
[producer] =>
[modDate] =>
[title] =>
[creator] =>
[author] =>
[pages] =>
[realSize] =>
[html] => 0
[png] => 0
[txt] => 0
[version] => 1
[source] => 0
[fccId] => 2A7F8-TTC-H40
[cleanFccId] => 2A7F8TTCH40
[exif] => 0
)
)