This document presents the calibration certificate for the D2600V2 dipole, serial number 1198, performed by CTTL SPEAG. The calibration adheres to national standards, ensuring traceability and accuracy in physical measurements. The certificate details the calibration procedures (FF-Z11-003-01) used, the calibration date (October 23, 2024), and the environmental conditions maintained during the process (temperature and humidity).
The document outlines the calibration equipment used, including primary standards like the Power Meter NRP2 and Power sensor NRP6A, as well as secondary standards such as the Signal Generator E4438C and Network Analyzer E5071C. Key parameters measured include impedance, return loss, and SAR values, both measured and normalized. The certificate also includes antenna parameters with Head TSL and general antenna parameters, along with additional EUT data.
The calibration process follows IEC/IEEE 62209-1528 and KDB 865664 standards. The reported uncertainty of measurement is stated as the standard uncertainty multiplied by a coverage factor of k=2, corresponding to a coverage probability of approximately 95%.