This document presents the calibration certificate for the EX3DV4 probe, serial number 7391. The calibration was performed by the CTTL speag Calibration Laboratory, adhering to the FF-Z11-004-02 standard, which outlines calibration procedures for dosimetric E-field probes. The certificate details the equipment used, including primary and secondary standards, and specifies the environmental conditions maintained during the calibration process.
The calibration results encompass basic parameters such as Norm(x, y, z) and DCP, as well as modulation response data for various communication systems. The frequency response of the probe is also characterized. The document includes information on isotropy and sensor offset. The calibration process adheres to IEEE Std 1528-2013 and IEC 62209 standards for SAR measurements. The reported uncertainty of measurement is stated as the standard uncertainty multiplied by the coverage factor k=2, corresponding to a coverage probability of approximately 95%.