This document presents an RF exposure evaluation for a device with FCC ID 2A74AC50. The evaluation is conducted according to KDB 447498 D01 V06 and part 2.1093 of the FCC regulations. The primary objective is to determine whether the device meets the SAR test exclusion thresholds, thereby avoiding the need for a full SAR evaluation.
The report details the methodology used, including the formulas for calculating EIRP (Equivalent Isotropically Radiated Power) based on field strength measurements. It also specifies the frequency range considered (100 MHz to 6 GHz) and the test separation distances (≤ 50 mm). The calculations are performed using measured field strength, maximum tune-up power, and minimum test separation distance. The calculated thresholds are then compared to the limits specified in the KDB guidelines.
The results of the evaluation indicate that the calculated thresholds are below the specified limits, leading to the conclusion that a SAR test is not required for this device. This determination is based on the device's compliance with the SAR test exclusion thresholds outlined in the relevant FCC regulations and KDB procedures.