This document presents the RF exposure evaluation for a wireless charging power strip, identified by FCC ID 2BOXG-XH001. The evaluation adheres to FCC regulations, specifically Part 2.1091, and follows the guidelines outlined in KDB 680106 D01 Wireless Power Transfer v04. The device was tested in a continuously wireless charging mode, with power supplied at 100-250VAC 50/60Hz. The report details the test setup, including the use of calibrated equipment such as the Narda ELT-400 and ETS field probes.
Measurements were taken at a distance of 20 cm from all sides and the top of the EUT (Equipment Under Test), and the electric and magnetic field strengths were recorded. The results indicate compliance with the limits for Maximum Permissible Exposure (MPE) as specified in 1.1307(b). The report includes a description of the test environment, the equipment used, and the test procedure followed to ensure accurate and reliable results. The evaluation confirms that the wireless charging power strip meets the required safety standards for RF exposure.