This document presents the SAR (Specific Absorption Rate) test results for the system verification of BTL's Dipole 2450 MHz (model D2450V2, serial number SN:919). The tests were conducted on 2024/9/24 in accordance with BTL's testing procedures. The report includes detailed information about the test setup, including the used probe (EX3DV4-SN3809), electronics (DAE4 Sn420), and phantom (ELI v5.0_Left, Serial: TP:1222).
The report outlines the DASY configuration used for the measurements, including the probe calibration details and sensor-surface distance. Area and zoom scans were performed to determine the SAR distribution. The maximum SAR value measured during the area scan was 14.6 W/kg. The zoom scan results show a peak SAR (extrapolated) of 26.2 W/kg, with SAR(1 g) and SAR(10 g) values of 12.90 W/kg and 6.00 W/kg, respectively. The maximum SAR value measured during the zoom scan was 21.5 W/kg. The report concludes with a visual representation of the SAR distribution.