This document presents the RF Conducted Emissions test report prepared by Shenzhen Huaxia Testing Technology Co., Ltd. The report details the testing procedures and results for compliance with FCC Part 15C Section 15.247, specifically addressing band-edge emissions. The test methodology adheres to ANSI C63.10:2013 standards.
The report includes a comprehensive overview of the test setup, which involves connecting the Equipment Under Test (EUT) to a spectrum analyzer via an attenuator. Key parameters such as test mode, limit, and test results are clearly outlined. The report also provides detailed measurement data, including burst width, total hops, result, limit, and verdict for various test modes (DH1, DH3, DH5, 2DH1, 2DH3, 2DH5, 3DH1, 3DH3, 3DH5). The test results indicate that the device passed the required limits.
Furthermore, the report features test plots illustrating the band-edge emissions for different configurations, including low and high frequencies, as well as hopping modes. These plots provide visual confirmation of the device's compliance with the regulatory requirements. The report concludes with a summary of the findings, confirming that the device meets the necessary standards for RF Conducted Emissions.
File Info : application/pdf, 14 Pages, 5.48MB
DownloadDocument