This document presents the test results for band edge and conducted spurious emission measurements performed on the MZYIA55SC device. The tests were conducted according to FCC regulations and standards to ensure compliance with emission limits. The device was tested in various modes, including 11B, 11G, 11N20SISO, 11N40SISO, 11AX20SISO, and 11AX40SISO, with antenna 1 used for all tests. The frequency ranges covered in the spurious emission tests include 30~1000 MHz and 1000~26500 MHz.
The band edge measurements were performed to verify that the emissions at the edge of the operating band meet the specified limits. The results indicate that the device passed all band edge tests. The conducted spurious emission tests were conducted to measure the emissions outside the operating band. The results show that the device meets the required limits for conducted spurious emissions in all tested modes and frequency ranges. Detailed graphs and data tables are provided to support the findings.
The test setup and procedures followed industry best practices to ensure accurate and reliable results. The equipment used for testing was calibrated and maintained according to manufacturer specifications. The results presented in this document demonstrate that the MZYIA55SC device complies with the applicable FCC regulations for band edge and conducted spurious emissions.