This document presents the test results for conducted band edge and out-of-band emissions for WIFI 2.4G devices. The tests were conducted to ensure compliance with regulatory limits, specifically focusing on spurious emissions at the band edge. The limit for out-of-band spurious emissions at the band edge is 30dB below the fundamental emission level, as determined from the in-band power measurement of the DTS channel performed in a 100 kHz bandwidth per the PSD procedure.
The testing methodology followed KDB 558074 D01 v05r02 - Section 8.5 & Section 8.6 and ANSI C63.10 – Section 11.11&11.12 standards. The test setup involved using an analog signal source, vector signal source, spectrum analyzer, and comprehensive tester, all controlled by automatic control unit and test software. The report includes detailed graphs and tables showing the test results for different channels and frequency ranges, ensuring that the device meets the required specifications.