This document is an FCC Part 90 test report for the Waltero AB W-Sensor LTE device. The report details the testing procedures and results to ensure compliance with FCC regulations. The tests were conducted by Huarui 7layers High Technology (Suzhou) Co., Ltd. and BV 7Layers Communications Technology (Shenzhen) Co. Ltd. The device was found to comply with the requirements of FCC Part 90, Subpart R, S, and FCC Part 2, as well as ANSI/TIA/EIA-603-D, ANSI/TIA/EIA-603-E, and ANSI C63.26-2015 standards.
The report includes information on output power measurement, frequency stability measurement, occupied bandwidth measurement, emission mask measurement, conducted spurious emissions, radiated emission measurement, and peak to average ratio. The test setup and procedures are described in detail, and the test results are presented in tables and graphs. The report also includes information on the test site and instruments used, as well as the general description of the EUT and applied standards.
The FCC ID for the device is 2BNXWWS-001. The tests were performed between December 27, 2024, and January 23, 2025.