This document presents an RF exposure evaluation for the device with FCC ID 2AZQ8-POD4, conducted according to 447498 D01 General RF Exposure Guidance v06. The evaluation focuses on the 1-g and 10-g SAR test exclusion thresholds for frequencies between 100 MHz and 6 GHz, with test separation distances of ≤ 50 mm.
The evaluation uses the formula [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] to determine compliance, where f(GHz) is the RF channel transmit frequency in GHz. Power and distance are rounded to the nearest mW and mm before calculation, and the result is rounded to one decimal place for comparison.
The report details the worse-case output power for both EDR and BLE modes. For EDR, the maximum output power is 3.07dBm (2.03 mW), resulting in a calculated value of 0.63, which is less than the 3.0 threshold for 1-g SAR. Similarly, for BLE, the maximum output power is 2.50dBm (1.78 mW), resulting in a calculated value of 0.55, also less than the 3.0 threshold. Based on these results, the SAR evaluation is not required.