This document presents the test report for the GL Technologies Wireless Human Presence Sensor, model LWR01, FCC ID 2AFIW-LWR01. Conducted by EMTEK (Shenzhen) Co., Ltd., the report details the testing procedures and results to ensure compliance with FCC Part 15 Subpart C standards. The tests were performed between April 21, 2025, and May 20, 2025, and the report was issued on May 22, 2025.
The EUT (Equipment Under Test) was evaluated for various parameters, including DTS (6dB) Bandwidth, Maximum Peak Conducted Output Power, Maximum Power Spectral Density Level, Unwanted Emissions, Radiated Spurious Emissions, and Conducted Emissions. The test setup and procedures adhered to ANSI C63.10 (2013) guidelines. The EUT operated in O-QPSK mode, and the tests covered the lowest, middle, and highest frequencies within the 2405-2480MHz range. The report confirms that the LWR01 sensor meets the required FCC standards, ensuring its safe and compliant operation.