BTF250411R00801 Test Report: BLE Bandwidth, Power, and Emissions

Appendix-BLE

This document presents the test results for a Bluetooth Low Energy (BLE) device, as detailed in test report BTF250411R00801. The report covers a range of tests, including bandwidth measurements (both 99% Occupied Bandwidth and 6dB Bandwidth), maximum conducted output power, power spectral density (PSD), and unwanted emissions in non-restricted frequency bands. All tests were performed using a Single-Input Single-Output (SISO) configuration.

The bandwidth tests confirm compliance with regulatory limits, with both OBW and 6dB bandwidth measurements falling within acceptable ranges for 1M and 2M modes. The maximum conducted output power is also shown to be within the specified limits. Power Spectral Density measurements are presented, demonstrating compliance with PSD limits. Finally, the report includes data on unwanted emissions, ensuring that the device meets the required standards for emissions outside of the designated operating bands.

The test results indicate that the BLE device meets all the tested requirements and is compliant with the relevant FCC and ANSI standards. Detailed graphs and tables are provided to support the findings.


File Info : application/pdf, 40 Pages, 5.51MB

Download
WPS 文字
BLAB: BTF250411R00801, BLE, Bandwidth, Power, Emissions, SISO, 2402 MHz, 2440 MHz, 2480 MHz, FCC Part 15.247, ANSI C63.10-2020