This document presents the test setup photos for the device with FCC ID 2BNBT-GL15. The photos illustrate the configurations used during emissions testing to ensure compliance with FCC regulations. The document includes setups for both radiated and conducted emissions testing.
Radiated emissions testing covers both restricted and non-restricted frequency bands. The photos show the device under test (DUT) positioned within the anechoic chamber, along with the antenna used for measuring emissions. Different frequency ranges (30 MHz – 1 GHz and above 1 GHz) are tested with appropriate antenna and setup configurations.
Conducted emissions testing focuses on the AC power line. The photos show the DUT connected to the AC power line, with the line impedance stabilization network (LISN) used to provide a stable impedance for accurate measurements. The setup ensures that conducted emissions from the DUT are properly measured and analyzed.
These test setup photos are a crucial part of the compliance documentation, providing visual evidence of the testing procedures and configurations used to verify the device's adherence to FCC standards.