This document presents the Appendix Test Data for a Bluetooth Low Energy (BLE) device, as tested by Shenzhen Anbotek Compliance Laboratory Limited. The report number is 1812C50222912502, and it covers a range of tests performed on May 19, 2025. The tests include 6dB bandwidth, 99% occupied bandwidth, maximum conducted output power, maximum power spectral density, band edge measurements, conducted spurious emissions, and duty cycle.
The device was tested in BLE_1M mode, and the results are presented for channels 2402 MHz, 2440 MHz, and 2480 MHz. The report includes detailed test results, graphs, and settings used during the testing process. The tests were conducted under controlled environmental conditions, with a temperature of 27°C and relative humidity of 52%. The pressure was maintained at 101kPa.
The report concludes that the device meets the required specifications for the tests performed, as indicated by the "PASS" verdict for each test. The data presented in this report is intended to provide detailed information about the device's performance and compliance with relevant standards.