This report details the results of FCC Part 15 Subpart C testing conducted on the Imin Falcon 2 Max POS Device, model number 124T03. The tests were performed by Shenzhen Global Test Service Co., Ltd., an accredited laboratory (CNAS L8169, A2LA 4758.01). The report references standards including FCC Rules Part 15.247 and ANSI C63.10-2020.
The EUT (Equipment Under Test) was evaluated for compliance regarding frequency hopping systems operating within the 2400-2483.5 MHz band. Tests included AC power conducted emissions, radiated emissions, maximum peak output power, 99% and 20dB bandwidth, frequency separation, conducted spurious emissions, number of hopping frequencies, time of occupancy, pseudorandom frequency hopping sequence, and antenna requirements. The test results indicate that the Imin Falcon 2 Max POS Device complies with the specified FCC standards.
The report also includes detailed equipment lists, test setup photos, and external/internal photos of the EUT. Three versions of the 124T03 model were tested, and the worst-case results are reported. The antenna used is a FPC Antenna with a maximum peak gain of 2.00dBi.