This document presents the test report for AC power line conducted and radiated emissions, conducted to ensure compliance with FCC Part 15C and ISED standards for 2.4GHz WIFI devices. The report details the test setup, including block diagrams illustrating the equipment arrangement for both conducted and radiated emissions testing. It specifies the limits for emissions as defined by FCC 15.205 and 15.209, as well as ISED RSS-Gen Clause 8.8, covering frequency ranges from 9 kHz to 25 GHz.
The test procedure outlines the steps taken to measure emissions, including the use of spectrum analyzers with specific settings for resolution bandwidth (RBW) and video bandwidth (VBW). The report also describes the antenna positioning and turntable adjustments used to maximize signal detection. Furthermore, it includes information on the equipment used, such as the EMI Test Receiver and Artificial Mains Network (AMN), and the methods for extrapolating measurements taken at different distances. The results of the tests are presented, indicating whether the device passed the compliance requirements.
Array
(
[0] => Array
(
[url_sha] => 5c14defc34557e8d9f707e0121eb5a5646a2aecf336f48aaea5254bd1f3e544b
[source] => fccid
[url] => https://apps.fcc.gov/eas/GetApplicationAttachment.html?id=8262920
[href_text] => FCCPart15C&ISED2.4GWIFI 81-90
[href_description] => EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED ELRT8192FCT IEEE 802.11b/g/n 2T2R USB Wi-Fi Module 2AWY6-ELRT8192FCT 2AWY6ELRT8192FCT elrt8192fct
[http_status] => 200
[http_lastmod] => 0000-00-00 00:00:00
[http_contenttype] =>
[http_filename] => GetApplicationAttachment.html?id=8262920
[http_size] => 1830818
[file_sha256] => 2978df9ff7c59f592fb14641648d2423cee36508da3c13f04674e67059a5e23c
[domain] => document.fccid
)
)
Array
(
[file_sha256] => 2978df9ff7c59f592fb14641648d2423cee36508da3c13f04674e67059a5e23c
[cleanFccId] => 2AWY6ELRT8192FCT
[title] => AC Power Line Conducted & Radiated Emissions Test Report
[description] => This report details the AC power line conducted and radiated emissions testing for FCC Part 15C and ISED 2.4G WIFI compliance. It includes test setups, limits, and procedures.
[brand_name] => N/A
[keywords] => ["FCC Part 15C", "ISED 2.4G WIFI", "Radiated Emissions", "Conducted Emissions", "ANSI C63.10-2013", "CISPR Quasi-Peak Detector", "EMI Test Receiver ESR3"]
[intro] =>
This document presents the test report for AC power line conducted and radiated emissions, conducted to ensure compliance with FCC Part 15C and ISED standards for 2.4GHz WIFI devices. The report details the test setup, including block diagrams illustrating the equipment arrangement for both conducted and radiated emissions testing. It specifies the limits for emissions as defined by FCC 15.205 and 15.209, as well as ISED RSS-Gen Clause 8.8, covering frequency ranges from 9 kHz to 25 GHz.
The test procedure outlines the steps taken to measure emissions, including the use of spectrum analyzers with specific settings for resolution bandwidth (RBW) and video bandwidth (VBW). The report also describes the antenna positioning and turntable adjustments used to maximize signal detection. Furthermore, it includes information on the equipment used, such as the EMI Test Receiver and Artificial Mains Network (AMN), and the methods for extrapolating measurements taken at different distances. The results of the tests are presented, indicating whether the device passed the compliance requirements.
)
Array
(
[0] => Array
(
[id] => 8262920
[file_sha256] =>
[applicationId] => QGVTQ+FYJT2KgcDU7WqwKg==
[description] => FCCPart15C&ISED2.4GWIFI 81-90
[shortTermConfidential] => No
[permanentConfidential] => No
[supercede] => No
[exhibitType] => Test Report
[fileType] => Adobe Acrobat PDF
[displayType] => pdf
[fileSize] => 1830820
[submissionDate] => 2025-05-06 00:00:00
[dateAvailable] => 2025-05-06 00:00:00
[creationDate] =>
[producer] =>
[modDate] =>
[title] =>
[creator] =>
[author] =>
[pages] =>
[realSize] =>
[html] => 0
[png] => 0
[txt] => 0
[version] => 1
[source] => 0
[fccId] => 2AWY6-ELRT8192FCT
[cleanFccId] => 2AWY6ELRT8192FCT
[exif] => 0
)
)